Product knowledge: slow rebound of the manufacturing process there are two: cutting and molding. Cutting on the use of large foam slow rebound sponge, cut into pillow shape, because the cutting process, the product surface will be relatively rough and rebound and support the effect is worse than the molding. Molding process is the material directly in the mold foam stereotypes, the product surface is smooth, rebound and support the effect is better, the product feel very good, the molding process is slow rebound pillow main production process, cutting process is only suitable for low-cost products The

Feel and temperature sensing: warm sense, is the temperature sensing of the human body, warm sense of strong memory pillow will be hardened at low temperatures, when the temperature close to 20 degrees when it becomes soft, so that the body can contact with the pillow more paste Fit body, non-contact surface to maintain the hardness of the human body.

Service life: The quality of the slow rebound pillow is mainly related to whether it is 100% pure material production, if it is 100% pure slow rebound material (memory cotton) production, product life in more than 5 years, but if it is to increase Density and weight added talcum powder and other raw materials, poor quality pillow, usually only use about 1 year.